Clik here to view.
MYIR Introduced Cost-effective MYC-C7Z010/007S CPU Module
Shenzhen, China – March 20, 2018 – MYIR introduced a cost-effective CPU Module MYC-C7Z010/007S powered by Xilinx XC7Z007S (Zynq-7007S) or XC7Z010 ( Zynq-7010) SoC device. It is an industrial-grade...
View ArticleClik here to view.
STM8S903K3T6C 8Bit Microcontroller from STMicroelectronics
If an 8bit microcontroller is needed… If an 8bit microcontroller is needed, Microchip normally comes up first. STMicroelectronics, a company more commonly associated with 32-bit processors, also...
View ArticleClik here to view.
Particle sensor with LoRa
Mare published a new build: Particle sensors could be cheap and easy to use. Disadvantage of lowest cost PM sensors is lack of “calibration”. The best method to measure particle content dispensed in...
View ArticleClik here to view.
Microchip’s MCP1640 – Super-Effective Battery Power
Designers working on line-powered systems are in luck… Designers working on line-powered systems are in luck; whilst wasting power is always bad, a few mA of waste don’t really matter. When working on...
View ArticleClik here to view.
ATmega32U4-Based Synchronous MPPT Buck Solar Charger
You want to maximize the power output of your solar panel? Then you need a maximum power point tracking charge controller! Source files here. Features: Programmable with Arduino IDE Input voltage: 15...
View ArticleClik here to view.
Femtosecond Electronics With Plasmonic Hot Electron Nano-emitters
A team led by the Technical University of Munich (TUM) physicists Alexander Holleitner and Reinhard Kienberger has found success for the first time in generating ultrashort electric pulses on a chip....
View ArticleClik here to view.
uStepper – Controlling Stepper Motor with ease
But what is uStepper? In short, uStepper is a product, improving performance of a motor type called “stepper motors”. Stepper motors are used in a wide range of applications where you have to move...
View ArticleClik here to view.
Vehicle Battery monitor on a automotive relay form factor
Jesus Echavarria has tipped us with his latest project. A car battery monitor in a Relay form Factor. Unfortunately only hardware details are given and no details on software. He writes: Hi all! I’m...
View ArticleClik here to view.
Adlink Launches A New Apollo Based Fan-less Panel Computer Series
Adlink, a provider for embedded and computer solutions has launched a new panel computer to the market. Adlink has been known for providing different types of panel computers for the different markets...
View ArticleClik here to view.
Google Unveils USB Type-C Version Of It’s Edge TPU AI Chip
Google has come up with its Edge TPU machine learning chip announcement by also revealing a USB Type-C based device that can be plugged into any Linux or Android Things computer, including a Raspberry...
View ArticleClik here to view.
Obinz is a hardware platform specially built for IoT
In the last few years, we have seen a proliferation of hardware that are designed to serve as our interface to the Internet of Things. We have seen boards like the Arduino, Raspberry, Particle, ESP12,...
View ArticleClik here to view.
Wyostat: Open source Thermostat
Kevin has been working on building his own thermostat. He writes: Does the world need another connected thermostat? When my thermostat went on the blink last winter, I looked at Nest, and Ecobee, and...
View ArticleClik here to view.
PCBWay Offers Low Cost SMD Stencils
A new offer has been thrown to the public by PCBWay; The public can now get various sizes of SMD (Surface Mounted Devices) stencils. A stencil is a utensil that contains a perforated sheet through...
View ArticleClik here to view.
Sapphire’s New FS-FP5V SBC Incorporates Ryzen Embedded V1000 SoC
Sapphire Technology, a Hong Kong-based technology company, has launched a 147.3 x 139.7mm Mini-STX (almost 5×5-inch) form factor SBC that runs Ubuntu 16.04 or Windows. It is powered by AMD’s new Ryzen...
View ArticleClik here to view.
PopCom – Identify your COM ports
avishorp has written a small program that pops up a message whenever a serial port over USB device is plugged in, that is available on GitHub (code). PopCom is a COM port plug-in/plug-out notifier....
View ArticleClik here to view.
FriendlyELEC Launches a new Samsung Powered Octa-Core Board
Smart6818 is a board built for industrial applications and is a successor to the Smart210 board. At the heart of the Smart6818 is the powerful Samsung Octa-Core Cortex-A53 S5P6818 SoC which is able to...
View ArticleClik here to view.
Seco’s New i.MX8M And i.MX8Quad Based Modules Run Linux
Seco Embedded Creators have launched the i.MX8M based Q7-C25 and i.MX8Quad based Q7-C26. Both can run Linux and Android, and are available in 0 to 60°C and -40 to 85°C models. The 5V modules have many...
View ArticleClik here to view.
Evervision expands all-in-one HDMI TFT displays portfolio
Evervision Electronics Europe has expanded its range of HDMI TFT displays to address growing demand, adding five new display sizes to its portfolio. [via] The Evervision HDMI TFT displays modules are...
View ArticleClik here to view.
ATtiny1607 – A TinyAVR MCU Family For Real-Time Control Systems
In continuation of the development of microcontrollers for a real-time control system, Microchip unveils a new set of microcontroller family based around the known Atmel ATtiny family called the...
View ArticleClik here to view.
Exen Proto – A Tiny 32-bit Arduino Compatible Board
The Exen Mini was categorized as one of the world’s smallest 32-bit Arduino compatible boards that was launched by Nerdonic, although the board was able to get the job done in some areas it still had...
View Article